e 3 ds23023 rev. 7 - 2 1 of 3 sb320-sb360 www.diodes.com diodes incorporated sb320 - sb360 3.0a schottky barrier rectifier features do-201ad dim min max a 25.40 b 7.20 9.50 c 1.20 1.30 d 4.80 5.30 all dimensions in mm a a b c d maximum ratings and electrical characteristics @ t a = 25 c unless otherwise specified guard ring die construction for transient protection low power loss, high efficiency high surge capability high current capability and low forward voltage drop surge overload rating to 80a peak for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications lead free finish, rohs compliant (note 4) iec 61000-4-2 (esd - 150pf/330 ) air discharge - 15kv contact - 15kv mechanical data case: do-201ad case material: molded plastic. ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: finish - tin. solderable per mil-std-202, method 208 polarity: cathode band marking: type number weight: 1.1 grams (approximate) single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol sb320 sb330 sb340 sb350 sb360 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage (note 2) v rrm v rwm v r 20 30 40 50 60 v rms reverse voltage v r(rms) 14 21 28 35 42 v average rectified output current (note 1) (see figure 1) i o 3.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 80 a forward voltage @ i f = 3.0a v fm 0.50 0.74 v peak reverse current @ t a = 25 c at rated dc blocking voltage (note 2) @ t a = 100 c i rm 0.5 ma 20 10 typical thermal resistance (note 3) r ja 30 c/w r jl 10 operating temperature range t j -65 to +125 -65 to +150 c storage temperature range t stg -65 to +150 c notes: 1. measured at ambient temperature at a distance of 9.5mm from the case. 2. short duration pulse test used to minimize self-heating effect. 3. thermal resistance from junction to lead vertical p.c.b. mounted, 0.500" (12.7mm) lead length with 2.5 x 2.5" (63.5 x 63.5m m) copper pad. 4. rohs revision 13.2.2003. high temperature solder exemption applied, see eu directive annex note 7.
ds23023 rev. 7 - 2 2 of 3 sb320-sb360 www.diodes.com 0 16 32 48 64 80 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 max non-repetitive peak fwd sur g e current 8.3ms single half-sine-wave t= j t j(max) 10 100 1000 0.1 110 100 c , total capacitance (pf) t v , reverse voltage (v) fi g .4 t y pical total capacitance r f = 1.0mhz t=25c j v = 50m vp-p sig sb320 - sb340 sb350 & sb360 0.01 0.1 1 10 0.001 0.0001 0 20 40 60 80 100 i , instantaneous reverse current (ma) r percent of rated peak reverse (%) fi g .5 t y pical reverse characteristics sb320 - sb340 sb350 & sb360 t = 125c j t = 75c j t = 25c j 0.1 1.0 10 0.1 0.3 0.4 0.2 0.5 0.6 0.7 0.8 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) fi g .2 t y pical forward characteristics f t=+25c a t = +125 c a sb320 - sb340 sb350 & sb360 0 0.5 1.0 25 50 75 100 125 150 i average forward current (a) o, t , lead temperature ( c) fi g . 1 forward current deratin g curve l 1.5 2.0 2.5 3 . 0 resistive or inductive load 0.375? (9.5mm) lead length sb320 - sb340 sb350 & sb360
ds23023 rev. 7 - 2 3 of 3 sb320-sb360 www.diodes.com notes: 5. for packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf device packaging shipping sb320-b do-201ad 500/bulk sb330-b do-201ad 500/bulk sb340-b do-201ad 500/bulk sb350-b do-201ad 500/bulk SB360-B do-201ad 500/bulk (note 5) ordering information important notice life support diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes witho ut further notice to any product herein. diodes incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on our website, harmless against all damages. diodes incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written appr oval of the president of diodes incorporated.
|
